頻率 | 頻率范圍 | 9kHz ~ 3GHz | 老化率 | ± 10ppm, 0~50°C, 5ppm/年 | 頻寬范圍 | 2kHz ~ 3GHz 在 1-2-5 順序步進, 全展頻, 零展頻 | 相位噪聲 | -80dBc/Hz @1GHz 20kHz offset 典型值 | 掃頻時間范圍 | 50ms ~ 25.6s | 解析度帶寬 | 解析度帶寬范圍 | 3kHz, 30kHz, 300kHz, 4MHz | 解析頻寬度 | 20% | 視頻頻寬范圍 | 10Hz ~ 1MHz 1-3 步進 | 幅度 | 測量范圍 | -103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm -105dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-105dBm -105dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-105dBm (Span = 50kHz, RBW = 3kHz) | 過載保護 | Max. +30dBm, ±25VDC | 參考電平范圍 | -110dBm ~ +20dBm | 度 | ±1.5dB @100MHz | 頻率平坦度 | ±1dB | 幅度線性度 | ±1dB over 70dB | 動態范圍 | 平均背景噪聲 | <-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm <-137dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-137dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm | 三階交調失真 | <-70dBc RF Input @-40dBm, Ref.Level @-30dBm | 協波失真 | <-60dBc RF Input <-40dBm , Ref.Level @-30dBm | 非協波偽噪聲 | <-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm <-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz) | 總體 | 顯示器 | 640 x 480 高分辨率 TFT 彩色 LCD | 分割視窗 | 動態視窗: 上, 下 或交替 (兩個同時掃描視窗) | 游標 | 10 組峰值游標: 5 組△游標 功能: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort | 軌跡偵測 | 3 個軌跡功能:峰值, zui大值保持, 凍結, 平均, 軌跡數學運算 | 功率測量 | ACPR, OCBW, 信道功率, N dB 帶寬和相位抖動 | 自動設定功能 | 自動偵測并顯示 | 觸發 | 條件: 視頻, 模式: 普通, 單次, 連續 | 順序編程測量 | 可以不通過遠端控制軟件自動執行測試用戶定義的程序段, 10 組順序程序段設置 和 每個設置可有10 個程序段, 變量延遲 和 等待通過功能使自動測量更容易, 可順序鏈接和嵌套不同的順序設置. | 連接器 | 射頻輸入 | N 型母頭, 50Ω 標準 射頻輸入 VSWR: <2:1, @0dBm 參考電平 | 直流輸出 (for GAP-801) | 類型: SMB 公頭, zui大輸出 +9V/100mA. | 接口 | RS-232C | Sub-D 9 針母頭 | USB | USB Host/Device 全速 | VGA 輸出 | 前面板: 可插FLASH卡的A型插座 | 電源 | | | AC 100 ~ 240V, 50/60Hz | 附件 | | 操作手冊 x 1 電源線 x 1 USB 線(A型插頭轉小B型插頭) x1 | 尺寸和重量 | | 330(W) x 170(H) x 340(D) mm 約 6kg | 操作手冊 x 1 電源線 x 1 USB 線(A型插頭轉小B型插頭) x1 GSP-830E 3GHz Spectrum Analyzer Opt. 01 | Tracking Generator | Tracking Generator - Frequency Range: 9k~3GHz - Amplitude Range: -50dBm~0dBm - Amplitude Accuracy: ±1dB@100MHz, 0dBm - Amplitude Flatness: ±1dB@0dBm - Harmonics: <-30dBc typical - Reverse Power: +30dBm - Impedance: Type: N female, 50Ω nominal - RF output VSWR: < 2:1 | Opt. 03 | ± 1ppm Stability | * ±1ppm, 0~50 °C , ±1ppm/yr | | OPTIONAL ACCESSORIES | ATA-001 | BNC Antenna (An additional ADP-001 is needed for fitting GSP spectrum analyzers) | ATA-002 | Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) | GAP-801 | Preamplifier Preamplifier with 10dB(typical), gain 9kHz ~ 6GHz | GAP-802 | Preamplifier Preamplifier with 20dB(typical), gain 9kHz ~ 3GHz | RLB-001 | Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz | GTP-3000 | Passive touch Probe Set PR-03: Passive touch probe, SMA(F) ADP-002: Adaptor, SMA(J/F) ~ N(P/M) GTL-303: RF Cable Assembly, SMA(P/M), 600mm | GKT-001 | General Kit set ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1 GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2 GSC-002: Kit box x 1 | GKT-002 | CATV Kit set ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2 GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 GSC-003: Kit box x 1 | GKT-003 | RLB Kit set GAK-001: termination 50 , N(P/M) x 1 GAK-002: Cap with chain, N(P/M) x 1 GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2 GSC-004: Kit box x 1 | GKT-006 | EMI Probe Kit set ANT-01: 6cm Loop, H-Field Probe x 1 ANT-02: 3cm Loop, H-Field Probe x 1 ANT-03 6mm Stub tip, E- Field Probe x 1 PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1 ADP-01: N(P/M)~BNC(J/F) Adapter x 1 Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1 Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1 | GRA-404 | Rack Adapter Panel Rack Mounting (19", 4U) | GSC-001 | Soft Carrying Case | GTL-301 | RF Cable RG 223 N(P/M), 1000mm | GTL-401 | DC Power Cord DC power cord with DC Jack and lighter plug, Current 5A | | | | |